Setting up RetailEdge on a network is easy. RetailEdge has no
limits to the number of workstations that can be installed on a network. If you
want to see how RetailEdge runs on a network, you should download a copy of the
demo. The demo is set to allow two users to run the program simultaneously on a
network.
The four steps to setting up RetailEdge on the network are listed below.
1. Have your Windows network setup and confirm that the two computers are
communicating with each other.
2. Install RetailEdge (from the original installation CD) on the secondary
machine
3. On the second machine you should choose Options from the Tools menu and
press on the Network tab. On the network tab set the: Data Folder to
the data directory on the primary register. You can use the Universal Naming
Convention (UNC) to specify this directory. For instance, if the data is on a
in the Program Files\RetailEdge 7.5\Data directory on a computer called
Register, the data directory can be specified as \\Register\C\Program
Files\RetailEdge 7.5\Data. You can change this, however, we strongly recommend
that you keep your RetailEdge data on the primary register, so that if your
network goes down you can still ring in sales. Note: If you are using Windows
XP you will have to copy the Data folder on the machine where the data resides
to some other folder than the Program Files folder. You will then be able to
share the data for your additional workstations. Network Folder
to the same Network folder at the primary machine. You can also use the UNC.
Unique
Register ID and Name.
4. Then press OK. Check your inventory and customer files to make sure that you
are viewing the data on the main register.
Please feel free to
call us with any questions you might have. If you have any questions or need
additional information, please feel free to call us at 802-362-2296 or e-mail
us at sales@retailedge.com.